MCC Panel Fabricator Philippines: Built-to-Spec Motor Control Centers, Delivered Nationwide

A motor control center is the single enclosure that starts, protects, and monitors every motor on a plant floor: pumps, blowers, conveyors, mixers, extruders, and mills. When a Philippine buyer asks for an MCC panel fabricator, the scope runs wider than the steel box.

It covers the incoming section and busbar sizing, the starter buckets for each load, the protection and metering devices, the control wiring back to the field, and the labelling and as-built drawings that the electrical consultant will sign off on. JOHOB Hardware Trading supplies MCC panels as part of that full scope, alongside VFD panels, SDE panels, and star-delta panels in our electrical and controls scope. Because we also supply the mechanical side, from pumping and pressure systems to steam and boiler systems, the panel is specified against the actual motor list rather than a generic schedule handed over by a third party. That matters on retrofit work, where the panel has to land into an existing line-up and talk to equipment already on site.

We are a supplier, not a workshop, and we say so up front because it changes what you should expect. JOHOB sources from partner factories in the Philippines and China and delivers with local warranty and after-sales support. For control panels, our sourced manufacturer is Chutian, building with Inovance variable frequency drives. The panel is built to your submitted specification at a factory running a documented quality system, then landed, commissioned, and supported here. Certifications carried on the supplied equipment include ISO 9001 for the manufacturer quality management system, TUV SUD testing, and CE marking on electrical scope. On the pump side we also source Grundfos, DAB, Speroni, and CDL vertical multistage pumps, so a panel and the motors it controls can be quoted as one package. The practical benefit of the sourcing model is cost and repeatability on standard configurations. The practical cost is that a genuinely one-off, urgent, single-bucket rebuild is not our strength. If your requirement is a two-week emergency repair on an existing line-up, say so on the enquiry and we will tell you honestly whether our lead times fit.

The four panel types we supply solve different problems, and buying the wrong one is the most common avoidable cost on a Philippine plant project. A star-delta panel reduces starting current on a single larger motor and suits fixed-speed loads at one duty point. An SDE panel and a direct starter cover simpler fixed-speed duties. A VFD panel varies motor speed continuously, which is what you want on booster pump sets, blowers, and any load where flow or pressure changes through the day; we supply the VFD duplex control panel for pressure systems as a standard configuration. An MCC panel is the aggregation layer: a common bus feeding multiple starter sections, which can themselves be direct, star-delta, or VFD, in one coordinated line-up with one incoming supply and one earthing arrangement. Choose an MCC when you have several motors in one process area and want unified protection, metering, and expansion space. Choose individual panels when the loads are physically scattered or belong to separate systems. If you are weighing variable speed against fixed speed for a pumping duty, our VFD versus fixed-speed pumps guide walks through the calculation first.

Pricing on MCC panels is quote-based and we do not publish price lists, because the bill of materials moves with the motor schedule, the incoming rating, and the device brands your consultant has specified. What we commit to publicly are the terms. Standard lead times run 21 to 35 days for ex-stock configurations and 45 to 90 days for made-to-order builds, and a multi-section MCC with non-standard devices sits in the made-to-order band, so plan your electrical works programme against 45 to 90 days. We respond to RFQs within 1 business day. On tax, 12% VAT applies to VAT-registered buyers, while PEZA and SBMA locators and exporters are handled at zero-rated VAT, which is worth confirming at enquiry stage since it changes the landed figure materially on a full line-up. We supply nationwide across the Philippines: NCR, the rest of Luzon, Visayas, Mindanao, and the PEZA, SBMA, and Clark economic zones. Warranty and after-sales are handled locally rather than routed back to the factory.

The quality of an MCC quotation is set almost entirely by the completeness of the enquiry. Send us the motor schedule first: every load with kilowatt rating, voltage, phase, starting method required, and duty cycle. Then the incoming supply details, meaning the main breaker rating, the available fault level, and whether the supply is from a transformer you own or from the utility. Then the enclosure requirements: indoor or outdoor mounting, the ingress protection rating your specification calls for, and the ambient condition of the room. Then the device preferences, since many consultants nominate specific breaker and contactor brands. Then the standard and code edition your electrical consultant is designing to, including the Philippine Electrical Code edition referenced in the drawings. Finally, the site and the required on-site date, plus your VAT status and whether the site is inside a PEZA or SBMA zone. With those eight items we can return a technically comparable quotation. Without the motor schedule, no supplier in this market can give you a number worth relying on.

Most MCC enquiries reaching us in the Philippines arrive attached to a mechanical system, which is why our electrical scope is written to integrate. Pumping and pressure systems with VFD duplex panels are the highest volume pairing. Steam and boiler systems bring their own motor loads. Industrial processing lines, meaning briquette lines, mixers, extruders, and mills, typically justify a full MCC panel because the motor count is high and concentrated in one area. Water storage is supplied under our TankSmith modular water tanks sister brand, and commercial solar EPC sits with our Philvolt sister brand, so if your project needs generation as well as distribution we route that part correctly. The verticals we write for specifically are commercial laundry facilities, hotels, hospitals and healthcare facilities, food and beverage processing plants, and SBMA and PEZA locators. Each has a different motor profile, and the MCC panel specification should reflect that rather than being copied from a generic template.

• Electrical Panels and Controls Category
• VFD Duplex Control Panels
• VFD Panel Supplier for Makati
• Steam and Boiler Systems
• Guide: VFD vs Fixed-Speed Pumps
• SBMA and PEZA Locator Supply

Reviewed: July 2026