Cost of a 50 Cubic Meter FRP Tank in the Philippines

A 50 cubic meter FRP tank is the same as a 50,000-liter tank, and JOHOB Hardware Trading does not publish a fixed price for this size online. Final cost depends on four factors: panel specification, accessories, site conditions and delivery method. Panel specification covers whether the tank is sectional FRP/GRP paneling built to WRAS-certified standards, which raises cost compared to a basic non-potable configuration. Accessories such as level sensors, overflow piping, manholes and roof hatches add to the base quote. Site conditions, including foundation work, access for delivery trucks and whether the installation is at grade or on a rooftop, also change the final number. Delivery method matters too: a 50 cubic meter order can move faster and cost less if it is filled from ex-stock components (21 to 35 days), or it can be built made-to-order (45 to 90 days) if the buyer needs a non-standard panel configuration or capacity split across multiple cells. Because of this range of variables, JOHOB issues a written quote after a short requirements call rather than listing one number for every buyer. The quote itself responds within 1 business day of a request, so the absence of a public price does not mean a slow process.

The FRP (or GRP) panels used in a 50 cubic meter tank are sourced through an ISO 9001 certified partner factory and supplied with WRAS-certified panel options for potable water use. Depending on the application, the same panel system can carry TUV SUD testing and CE marking, and where the installation includes a pressure vessel component, ASME compliance applies. These certifications matter at this capacity because a 50,000-liter tank is typically installed for a commercial, industrial or institutional building, such as a multi-unit residential complex, a hotel, a hospital or a factory, where water quality and structural certification get checked during permitting and insurance review. The modular bolted-panel design also means a 50 cubic meter tank can be assembled on site without the crane access a monolithic tank of the same size would need, which is one of the reasons FRP is chosen over cast-in-place concrete at this scale. JOHOB supplies the tank with local warranty and after-sales support rather than a one-time sale, and buyers can request the specific certification documents (ISO 9001, TUV SUD, CE, WRAS, ASME where applicable) as part of the quote package so the paperwork is in hand before installation starts.

Standard 12% VAT applies to a 50 cubic meter FRP tank order for VAT-registered buyers in the Philippines. Buyers registered with PEZA or SBMA as locators, or buyers exporting under a zero-rated arrangement, qualify for zero-VAT treatment on the same order, provided the correct documentation is submitted with the purchase order. On lead time, a 50 cubic meter tank built from standard ex-stock panel sizes typically ships in 21 to 35 days from order confirmation. A made-to-order build, for example a non-standard footprint, a split-cell configuration, or a different accessory set, runs 45 to 90 days. Because a 50,000-liter tank is large enough that most projects need some site preparation in parallel (foundation, access road, electrical for the pump room), it is worth requesting the lead time estimate at the same time as the price quote rather than after the civil works are already scheduled. JOHOB responds to RFQs within 1 business day, so buyers planning around a fixed handover date can get both numbers, cost and lead time, early enough to sequence the rest of the project around them.

A 50 cubic meter tank on its own only stores water. Most installations at this capacity also need a pressure side: a booster or transfer pump set, and in buildings with variable demand, a VFD duplex control panel so two pumps alternate and ramp speed to match draw instead of cycling on and off at full speed. JOHOB supplies these as part of the same product range, booster, transfer and submersible pumps, and VFD, SDE, star-delta and MCC electrical panels, which means the tank and pump quote can be requested together instead of sourced from two separate suppliers. If the 50 cubic meter tank is intended as a fire reserve rather than a domestic or process supply, it should be scoped as part of the fire protection line (fire reserve tanks and sprinkler kits) instead, since the plumbing code requirements and accessory list differ from a potable or process tank. Flagging this at quote stage, domestic supply, process water, or fire reserve, keeps the pump and panel selection correct the first time.

At 50,000 liters, this capacity sits above a typical single residential rooftop tank and below the largest industrial reserves JOHOB supplies, which run to 500,000 liters or more. In practice, a 50 cubic meter tank is sized for buildings with sustained daily demand: mid-rise residential or commercial buildings, hotels, hospitals, food processing sites, and institutional campuses that need a buffer between the water utility feed and peak draw. JOHOB covers this capacity nationwide, across NCR, Luzon, Visayas and Mindanao, including PEZA, SBMA and Clark locators who may qualify for the zero-VAT treatment described above. Because the tank is modular and bolted rather than cast in place, the same 50 cubic meter target can be met with a single cell or split across two or more smaller cells where the roof or ground footprint is constrained, without changing the total stored volume. Buyers sizing a system around this capacity should also check the pump and pressure requirements in the same quote request, since the tank size on its own does not set delivery pressure or the number of outlets the system needs to serve.

Because a 50 cubic meter FRP tank is priced per project, the fastest way to get an accurate number is to submit a request with four details: intended use (domestic, process water, or fire reserve), site location, whether delivery is ex-stock or made-to-order timing is acceptable, and VAT status (standard 12% or PEZA/SBMA zero-rated). JOHOB responds to every RFQ within 1 business day with a written quote covering the tank, applicable certifications (WRAS, ISO 9001, TUV SUD, CE, ASME where relevant), VAT treatment and a lead time estimate, 21 to 35 days ex-stock or 45 to 90 days made-to-order. Buyers who also need a booster, transfer or VFD-controlled pump set can request that as part of the same quote so the tank and pressure system arrive on a matched timeline. Delivery covers NCR, Luzon, Visayas, Mindanao and PEZA/SBMA/Clark locations nationwide, with local warranty and after-sales support included.